Skip to content 
A bag making inspection system should do more than display an image. In applications that require automatic quality control, the inspection result also needs to connect with the production line and separate the affected bag at the correct position.
This short factory video shows a real inspection and rejection sequence on a bag-making line. The inspection screen displays the detected area, and the downstream mechanism diverts the affected bag from the normal product flow.
What The Video Shows
The first part of the video shows the inspection interface. The recorded image allows the operator to review the detected area instead of relying only on manual observation at production speed.
The camera then moves to the conveyor and rejection mechanism. After the inspection result is linked with the bag position, the affected bag is diverted from the normal line. This helps the operator handle a detected problem without manually searching through all finished bags.
The video demonstrates the workflow, not a universal detection guarantee. Actual performance depends on the bag material, print contrast, defect type, defect size, production speed, installation position, lighting and machine stability.
Why Automatic Rejection Matters
Detection alone does not complete the quality-control process. On a continuously running bag-making machine, the system also needs reliable position tracking and a suitable output signal. The rejection mechanism must act on the correct bag without disturbing normal production.
A practical project therefore needs to review three connected parts:
- whether the target defect can be captured clearly
- whether the detected bag can be tracked to the rejection point
- whether the machine has enough space and a suitable mechanism for rejection
What To Send Before Project Review
Before selecting a bag making inspection system with automatic rejection, please send:
- bag material and finished bag dimensions
- normal and maximum production speed
- good samples and defective samples
- the smallest defect that must be rejected
- photos of the inspection and rejection positions
- a short video showing the bag path
- the machine control and rejection signal requirements
These details help determine whether the camera, lighting, tracking method and rejection arrangement are suitable for the line.
Related Bainary System
The OK1000A Bag-Making Quality Inspection System is the relevant Bainary direction for bag-making inspection projects. Final configuration should be checked against the actual material, defect sample and machine layout.
Send Bainary your bag samples, defect photos, line speed and machine video so we can review the practical inspection and rejection requirements.